Common lifting stage machinery installation process

Release time:

2022-02-18

Summary： Lifting stage machinery is the stage commonly used in the form of stage, we need to protect the most is its safety. If there is a deviation in the installation, it is very easy to cause safety accidents. Let's take a look at the installation process of the lifting stage machinery.

Lifting stage machinery is the stage commonly used in the form of stage, we need to protect the most is its safety. If there is a deviation in the installation, it is very easy to cause safety accidents. Let's take a look at the installation process of the lifting stage machinery. The specific operation is as follows:

1. Before building the lifting platform equipment, two supporting legs can be roughly built on the ground;

2. Insert the diagonal pull rod on both sides into the pin on the leg table equipment without check valve;

3. Buckle the platform rack into the U-shaped groove above the support leg to complete the assembly of the first group of platforms;

4, put a leg and discharge;

5. Connect the original leg with two sets of oblique pull rods to fix the leg;

6. Lave the photo frame again. The two photo frames share one leg in the middle. The two photo frames are put into the U-shaped groove.

Key words:

Discussion on the Main Function of Stage Machinery Hanging Rod Machine

Stage lift equipment to be installed

Discussion on the Main Function of Stage Machinery Hanging Rod Machine

The next one:

Stage lift equipment to be installed